Air Logic Controlled Assists
Sunroof Install Assists
![3756-Sun-Roof-Install-Assist](https://rpgatta.com/wp-content/uploads/2023/06/3756-Sun-Roof-Install-Assist.png)
Features:
- Articulating Arm uses 3 pivots and pneumatic balance/lifting cylinder
- Integration of rpGatta’s Twist Grip Hoist/Balance Controller
- End effector utilizes durably patented vacuum cups
- Guide pins help facilitate location of vacuum cup end effector on the sunroof and the positioning of the sunroof on the car
- Air Logic Controlled
Floor Panel Assists
![3647-Floor-Panel-Assist-325x400 3647-Floor-Panel-Assist-325x400](https://rpgatta.com/wp-content/uploads/2023/06/3647-Floor-Panel-Assist-325x400-1.png)
Features:
- Vacuum cups securely hold floor panel into place during operation
- Air Logic Controlled
- “Lift” and “Lower” thumb switches located on an ergonomically designed handle, which is adjustable in height and angle
Belt Installation Assists
![3802-Belt-Install-Assist](https://rpgatta.com/wp-content/uploads/2023/06/3802-Belt-Install-Assist.png)
Features:
- Dual Runway and Monorail Bridge rail system
- Integration of rpGatta’s Twist Grip Hoist/Balance Controller
- Air Logic Controlled
HVAC Lift Assists
![3748-HVAC-Lift-Assist](https://rpgatta.com/wp-content/uploads/2023/06/3748-HVAC-Lift-Assist.png)
Features:
- Carriage with Turntable to allow HVAC units to be installed on both sides of line
- Air Logic Controlled
- Integration of rpGatta’s Twist Grip Hoist/Balance Controller
Seat Install Assists
![3749-Seat-INstall-Assist](https://rpgatta.com/wp-content/uploads/2023/06/3749-Seat-INstall-Assist.png)
Features:
- End effector suspended from a pneumatic cable balancer grips the seat unit and lifts into install position
- Accommodates both driver and passenger side seats
- Secondary pivot with friction brake facilitates entry into door
- Air Logic Controlled
- Integration of rpGatta’s Twist Grip Hoist/Balance Controller
Sub-Frame Assists
![4217-Sub-Frame-Assist-2](https://rpgatta.com/wp-content/uploads/2023/06/4217-Sub-Frame-Assist-2.png)
Features:
- rpGatta’s fourth generation Twist Grip Hoist/Balance Controller integration
- Pneumatically actuated 90 degree rotate mechanism allows technician to easily position the end effector/sub-frame assembly
- Adjustable handles with electric operated thumb switches to control the following operations of the assist: “Grip Door,” “Release Door,” “Common,” “Raise Door,” “Lower Door” and “Brake”
- An air cylinder provides vertical travel to pick the sub-frame assembly out of the rack and onto the conveyor
Track Press Fixture
![Track-Press-3](https://rpgatta.com/wp-content/uploads/2023/06/Track-Press-3.jpg)
![Track-Press](https://rpgatta.com/wp-content/uploads/2023/06/Track-Press.jpg)
Features:
- This operator-controlled assist picks and loads the RH and LH tracks onto steer skid loaders